Wrangler Tummy Tucker 03-06 TJ/LJ Manual Old Style

Box Dimensions: 
44 × 24 × 4 in
Box Weight: 
70 lb
Jeep LJ 04-06
Jeep TJ 97-06

*Maximum Ground Clearance saves over 2.5” versus the stock TJ skid designs – and only a 24” wide area is dropped where needed to accommodate the drivetrain and exhaust.

*Tough Construction using ¼” steel and strategic gusseting can support the entire vehicle’s weight without bending when the clearance isn’t enough.

*Smooth Design uses all countersunk bolts, minimal holes, and blended edges to make sure nothing stops you cold.

*Provisions are built into all TTs to work with Nth Gyro Joint™ Long-Arm suspensions and to relocate/remount/protect Rubicon TJ locker pumps.

*Integral Stinger Mount built into each TT is ready for an Nth-Stinger™ center-mounted rear torque arm.

*Special Trans Mount is included with every TT to allow the maximum possible clearance without the need for a body lift – even on Rubicon TJs.Tummy Tucker skid plate fits 2003-2006 Wrangler with manual transmission and NV231 transfer case.

***This is the old style Tummy Tucker that only fits the NV231 transfer case (does not fit NV241 Rubicon). It does not have the sump built in, so you gain an extra 1.5" of clearance. If you have no plans of swapping in a NV241 or Atlas transfer case, this is the skid for you. ***Improves Ground Clearance by 2.5-2.75” (on most models - depending on year & t-case) versus stock skid plate. Drop height is only 1.25” from the frame– and only where it’s needed, not rail-to-rail.